RED1800.5 1,800 Watts Class-D Car Audio 5-Channel Amplifier, Mono 1 Ohm Stable, Remote Bass Knob Included

Features:

Class-D 5-Channel Amplifier, 1,800 Watts Max Power, RMS 1,280 Watts x 1@1 Ohm; RMS 220 Watts x 4@2Ohm + RMS 980 Watts x 1@2Ohm; RMS 140 Watts x 4@4Ohm + RMS 600 Watts x 1@4Ohm. The mono channel is stable down to ONE Ohm, giving you the freedom to put even more subs in your system.

Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end. Highly efficient heatsinks keep the amplifier cool with a sophisticated new look.

Recoil5-Channel amplifiers come with bass remote control. Use it to customize your bass on the fly with just a turn of a knob.

You’ll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.

Dimensions: 14.6″ x 7.6″ x 2.2″ (370mm x 193mm x 56mm)

SKU: RED1800.5 Categories: , , , ,

Introductions:

The RecoilRED1800.5 full-range five channel amplifier offers high performance. It boasts an impressive 1,800 Watts of RMS power output (continuous), providing the versatility to power multiple sets of speakers as well as a subwoofer in your system. The RED1800.5 provides you with the tone controls you need to tune your system so that your speakers and sub sound their best. Utilizing the high-pass filters, you can remove the extreme low bass from your full-range speakers, so they’ll play more efficiently. You can adjust the subwoofer channel’s low-pass filter and bass boost to get just the right bass tone. This five channels amplifier comes with a remote bass knob and cable, providing the ability to control the bass from the dash.

Furthermore, the oversized 1/0 gauge power and ground terminals found on the amplifier allow for maximum current flow. In addition to all of the above features, this model also features 4-way protection circuitry, including electrical shortage, overheating, low voltage, and more.

Specification:

5-Channel Car Audio Amplifier

4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC

RMS Power at 2 Ohms: 220 Watts x 4 + 980 Watts x 1 Channel (14.4v)

RMS Power at 4 Ohms: 140 Watts x 4 + 600 Watts x 1 Channel (14.4v)

RMS Power at 1 Ohm for CH5 : 1,280 Watts x 1 Channel (14.4v)

High Speed MOSFET Power Supply

Soft Turn on Circuit

Frequency Response: 10Hz-25kHz (CH1-CH4) + 10Hz – 300Hz (CH5)

Signal to Noise Ratio: 89dB (CH1-CH4) + 94dB (CH5)

Bass Boost: 0 – 12dB (CH5)

Low Pass Filter (Variable): 40Hz – 260Hz

Subsonic Filter: 12Hz – 55Hz

Remote Bass Knob & Wire Included

1/0 Gauge Power and Ground Terminals

Fuse Rating:  200 Amp

Dimensions: 14.6″ x 7.6″ x 2.2″ (370mm x 193mm x 56mm)

Additional information

Weight 8.47 lbs
Dimensions 17.7 × 9.1 × 3.5 in

Reviews

There are no reviews yet.

Be the first to review “RED1800.5 1,800 Watts Class-D Car Audio 5-Channel Amplifier, Mono 1 Ohm Stable, Remote Bass Knob Included”

Your email address will not be published. Required fields are marked *